Skip to main content

Design a room in the 3D designer

Add rooms to a project, lay out cabinet runs, and switch between 3D, plan, elevations and the cut list.

Updated

Each room in a project is its own design. You lay it out in the designer, and the same design drives the quote, the cut list and the shop pack.

Open a room

  1. Open a project from Projects. The Design tab lists its Rooms.
  2. Select Add a room, then Open in the designer.
  3. An empty room shows Start your design. Pick Describe it to tell the AI chat what you want, Start empty, or a sample: L-shaped kitchen, Galley kitchen, Kitchen with island, Inset kitchen, Double vanity, Mudroom lockers, Laundry room or Reach-in closet.

When a room is ready, select Mark ready on the Rooms list. Field measurements records what you measured on site.

Views

The tabs at the top switch views:

  • 3D: the room in three dimensions. The Display group switches between Finished, Carcass (the boxes without fronts) and Exploded (parts pulled apart).
  • 2D plan: the floor plan. The Measure tool measures between two points; press Esc to stop.
  • Plan sheet: the dimensioned plan drawing.
  • Elevations: one wall at a time. Pick the wall with Wall.
  • Cut list: every part with its blank and finished size, grain, banding and machining, the nested sheets, solid stock and hardware.

In 3D, Camera has Fit, Top, Front and a preset for each wall. Show → Layers turns outlines, dimensions, slides, pulls, drawer boxes and shelves on or off. Show → Scene opens doors and changes light and shadows. On a narrow screen these sit under View.

Change the room and cabinets

The dock along the bottom opens the editing cards:

  • Selected: the cabinet, run, appliance or countertop you picked.
  • Style: door style, front material, pulls and finish. See Door styles, materials and finishes.
  • Trim: crown, light rail, valance, base shoe, end-panel moulding, corbels, scribes and finished toe kicks.
  • Build: the construction profile. See Construction profiles and toe kicks.
  • Objects: everything in the room.
  • Settings: room width, depth and ceiling height, windows and doors, and cabinet runs. Select Add run to start a base, upper, tall or island run.

To add a cabinet, open a run, choose a type and width under Add a cabinet, and select Add.

Click a cabinet to select it. Shift-click or ⌘-click selects several. The toolbar that appears changes width in 3″ steps, doors (None, 1 door, Pair), hinge side, drawers and shelves, moves the cabinet along the run, or deletes it. More actions (⋯) has Duplicate, Add one to the left, Add one to the right, All details… and Ask chat about this.

Shortcuts, undo and saving

  • ⌘Z or Ctrl+Z undoes; ⇧⌘Z or Ctrl+Shift+Z redoes. The designer keeps 50 steps.
  • With a cabinet selected: + and − change width by 3″, ← and → move it, D duplicates, H flips the hinge, Delete removes it.
  • Select ? in the designer for the full list.

The designer saves on its own a moment after each change. The badge shows Saving…, Saved or Save failed. If the save fails, select Retry.