A construction profile is how your shop builds a box: frameless or face frame, how it is joined, the toe kick, and the sizes that go with them. The cut list, shop pack and price all follow the profile.
Pick a profile for a design
- In the designer, select Build in the dock to open Construction.
- Choose a Shop profile:
- Frameless — confirmat (the default for new designs)
- Frameless — screw
- Frameless — flush inset fronts
- Japandi — proud spine, flush fronts
- Inset — traditional face frame
- Inset flush — narrow face frame
Your own profiles show with "(frameless)" or "(face-frame inset)" after their name.
A design keeps the profile version it was made with, so a design you have quoted keeps building the way it was priced. Choosing the profile again moves the design to its latest version.
Toe kicks
Every built-in profile has a toe kick 4.5″ high and 3″ deep. There are two kinds:
- Integrated: the cabinet sides are notched, and a toe kick board in the box material closes the front. Most profiles use this.
- Ladder base: a separate base of a front rail, a rear rail and cross members. Frameless — screw uses this.
The Finished toe kicks option under Trim adds a finished skin over the toe kick. It does not change how the box is built.
Frameless doors
On the current frameless profiles, doors sit in front of the box. Countertop overhang and appliance alignment are measured from the door face, so counters come out ¾″ deeper than the box alone. Sink and cooktop cutouts are still measured from the box.
Make your own profile
- Open Settings in the sidebar, then the Construction tab.
- Built-in profiles are marked Included with CabinetBuilder. Select Edit a copy or Make my own copy to start from one.
- Change the values, then select Save as my copy.
For your own profiles you can Edit, Duplicate, rename and archive. Each edit saves a new version with Save new version, and designs already quoted never change. Tick Show archived to see archived profiles and restore one.