On this page · 5 sections
Face-Frame vs Frameless Cabinets
How each one is built, and what it changes in the shop
CabinetBuilder.ai · Updated · 8 min read
Face-frame and frameless are two ways to build the same box. The choice changes the door style, the hinges, the cut list and how much you can batch in the shop.
Face-frame cabinets
A face-frame cabinet is a box with a frame of solid wood stiles and rails fixed to its front edge. The frame stiffens the box, hides the plywood edges and gives the doors something to hang on.
Face frames are the traditional American build. They suit shops with good solid-wood joinery and customers who want a furniture look. The frame narrows each opening, so drawers and pull-outs need to clear the stiles, and you lose a little width per cabinet.
Doors on a face frame can be:
- Overlay: the door covers part of the frame and a strip of frame shows around it.
- Full overlay: the door covers nearly all of the frame.
- Inset: the door sits inside the frame opening, flush with its face. See inset vs overlay doors.
Frameless cabinets
A frameless cabinet, sometimes called European or 32 mm construction, has no frame. The box edges are edge-banded, and doors hang on the box sides with cup hinges. Doors usually cover the full front with a small gap between them.
Frameless suits sheet-goods production. Every part is a rectangle cut from a sheet, the box sides take a line of system holes for shelves and hinges, and boxes assemble square without a frame to fit. With no frame narrowing the opening, drawers can run nearly the full width of the box.
What changes in the cut list
| Face frame | Frameless | |
|---|---|---|
| Front edge | Solid wood frame | Edge banding |
| Extra parts | Stiles and rails | None |
| Drawer width | Opening minus frame | Nearly the box width |
| Typical hinge | Face-frame or inset hinge | Cup hinge on the box side |
| Best for | Traditional look, inset doors | Batch production, modern look |
A face-frame job has a second cut list of solid-wood parts besides the sheet parts. A frameless job is almost all sheet parts and banding.
Which should a small shop offer?
Offer what you can build well and sell. Many shops build frameless for kitchens they want to batch and keep face frames for inset and furniture-style work. What matters is that the design, the cut list and the price all follow the same construction. A frameless price on a face-frame build loses the cost of the frame.
See both
- The galley kitchen example is frameless: open its cut list to see each sheet part and its banded edges.
- The inset kitchen example is face-frame inset, with doors hand-fit to a 3/32″ reveal.